手电大家谈-手电筒爱好者之家

 找回密码
 注册成为会员,享受更多功能。

QQ登录

只需一步,快速开始

只需一步,快速开始

搜索
查看: 4669|回复: 1

大功率绿色激光笔PGL-III电池选择

[复制链接]

该用户从未签到

发表于 2005-10-24 23:36 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?注册成为会员,享受更多功能。

x
<P>如图,以我的长春CNI PGL-III为例,横轴为电压,纵轴为电流、功率。蓝色曲线为实测电流(A),红色为激光输出功率。<br>根据实际测量和电路推测,正常的工作电压为2.45V到3.3V。此时由于内部的恒流电路在起作用,电流和输出功率都维持在一个正常值,并与电池电压无关。<br>当电压超过3.3V时,尽管恒流电路仍然可以工作,但里面的贴片恒流管比较小,负担了过大的额外电压,恒流电路发热严重,容易损坏。因此,高电压尽管可以使用,但应控制每次点燃时间,此段为危险段。<br>当电压低于2.45V时,恒流电路已不起作用,大部分电压已经共给LD但仍不够,造成电流降低,因此输出功率大大降低。<br>对于原来使用的2节2号碱性电池,新电池开路电压为3.2V左右,有载电压为2.9V-3.0V,完全符合要求。但在碱性电池放电的末期电压不足,因此电池不能完全利用。<br>一次性锂电池额定3V,放电电压平稳,但CR123类电池放电电流有限,大电流放电效果不佳,再加上本身容量比较小,因此放电时间偏短,经济性不好。<br>2节镍氢可充电电池带载工作电压一般是1.8-2.4V,显然偏低不适合此处使用。当然,如果有3节短镍氢也可以考虑,电压稍微偏高。<br>可充电锂电池单节电压在3.0-4.2之间,较大电流放电电压在2.8-4.0V。显然超过了激光笔的供电要求。直接替换可以点亮但很容易使电路过热,同时在放电后期容易过放电而损害锂电池。<br>当可充电锂电池串联一个正向二极管(压降0.7V左右),电压范围就降低到2.2-3.3V,非常适合激光笔使用。<br>我自己就采用了最后一种方法,把原2节2号电池改造成18650,容量大且可充电。<br>由于18650比2号电池细,找了个PVC塑料管套在上面。又由于18650比2节2号短,因此用2号电池的前半部分做了个假电池,正好把3A的二极管焊在里面,其管脚很硬同时作为支撑。另外这个二极管同时起到防止电池装反保护,以及减少过放电危险的作用。</P>
<P><img src="attachments/dvbbs/2005-10/2005102415431119397.gif" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-10/2005102415431119397.gif\');}" onmousewheel="return imgzoom(this);" alt="" /></P>
<P><img src="attachments/dvbbs/2005-10/2005102319341437167.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-10/2005102319341437167.jpg\');}" onmousewheel="return imgzoom(this);" alt="" /><br><img src="attachments/dvbbs/2005-10/2005102319342761062.jpg" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor=\'hand\'; this.alt=\'Click here to open new window\nCTRL+Mouse wheel to zoom in/out\';}" onclick="if(!this.resized) {return true;} else {window.open(\'attachments/dvbbs/2005-10/2005102319342761062.jpg\');}" onmousewheel="return imgzoom(this);" alt="" /><br></P>
[此贴子已经被作者于2005-10-24 15:44:44编辑过]

回复 dsu_marcocopyright:copyright

使用道具 举报

该用户从未签到

发表于 2005-10-25 00:23 | 显示全部楼层
老大说得在理!
回复

使用道具 举报

本版积分规则

小黑屋|手机版|Archiver|论坛自带搜索|下载论坛app|手电大家谈-手电筒爱好者之家 ( 备案序号:鲁ICP备05002565号 )
以上言论纯属个人观点,与手电大家谈立场无关。
最佳浏览模式:1920*1080


GMT+8, 2024-5-16 06:02 , Processed in 0.180639 second(s), 26 queries , Gzip On.

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表