|
|
楼主 |
发表于 2011-2-26 23:19
|
显示全部楼层
本帖最后由 夾不死 于 2011-2-26 23:26 编辑
V3出来了，转自CPFMP，凑合看吧。
The ThruNite Catapult V3 version has been designed to be a search & rescue and tactical flashlight without peer. Catapult are known as well made flashlights and are super throw. can get 445 M.I think more detailed info please kindly refer to selfbuilt reviews.
Features:
Cree The newest XM-L LEDwith T6 bin
Stainless steel bezel
Tighen LED houlder for Maxium. 700+ OFT lumens more than 900 LED lumens loosen for Low.middle. high. and strobe.with memorary function!
Mil-Spec Type III Hard Anodizing
Constructed from 7075AL for superior durability. Length: 185mm; Head diameter: 58mm; Body diameter: 31mm; Weight: 390g. (Extension tube excluded) Tactical momentary-on forward click switch
IPX-8 Water/Dust Resistance
Tail cap design allows the light to tail stand
Shatter resistant ultra clear lens with double-sided multilayer AR coating
54mm textured orange peel reflector
BATTERY OPTIONS: 2 x 18650 / 2 x 17670 / 4 x CR123/ 2 x 18650/2 x CR123/2 x 16340
Operation
Press lightly for momentary on and fully press for switch on, turn the bezel to select low or high output. Tighten for high and loosen for low.
Battery Replacement
Unscrew the tail cap to insert the batteries with the anode side (+) toward the light’s head, screw the tail cap back on until it is tightened all the way.
7 Key Advantages of the ThruNite Catapult V3:
1. LED - Uses the revolutionary & cutting-edge Cree XM-L T6 bin LED for extreme brightness - with minimal artifacts in the beam pattern.
2. Lens - The Catapult uses an ultra clear glass lens with the addition of double side multi-layer AR coatings to ensure maximum light transmission and efficiency. This results in a 98.5% transmittance rating.
3. Reflector - Our optimized reflector creates maximum throw. They are designed according to automotive standards for a parabolic reflector. This design is often used in car lamps in the industry.
4. Driver - We use high quality components in our driver to provide an excellent and easy to use User Interface, while operates at roughly 90% efficiency. Since we have eliminated the MCU inside, it can work well with the higher temperature.
5. Design - The light is built as a robust, high quality tool to suit your needs for many years. It is very ergonomic -- The Catapult is designed with you in mind.
6. Stainless steel bezel replaces the aluminum bezel from previous version and adds to the overall rugged design of the light.
7. 2 18650 battery low indication. when the battery voltage less than 6v. the output will auto less to 1.7A for MAX output .the other mode will less to half of current below to mention battery is low! this is good for 2 Cr123A battery users who can get more run times!
The new version XM-L Catault v3. has more lumens more throw. more efficient.
We have some good filter(RED.Blue.Yellow. Green ).diffusser and beam cover released together! |
|
IP卡
狗仔卡
发表于 2011-1-31 15:55
置顶卡
喧嚣卡
变色卡
显身卡
