|
|
本帖最后由 狗狗蛙 于 2011-10-18 22:47 编辑
思迈的I4智能充电器被老外发现问题，在120V电压下无法正常工作。
CPF上原帖：http://www.candlepowerforums.com/vb/showthread.php?320968-JETBeam-Intellicharge-i4&p=3767756&viewfull=1#post3767756
英文全文：
I just recieved this:
"Dear customers,
If you are receiving this email you have recently purchased a Sysmax/Jetbeam i4 battery charger.
Please read important information about your charger below.
**We request that you immediately stop using the Sysmax i4 charger you recently purchased.
Please refrain from using the i4 charger until the correct 12V AC Adapter is provided. These were shipped with incorrect power cords, which will not allow the charger to operate correctly. If using the supplied cord the charger will not function properly and will not charger your batteries. Damage to the charger may result if using the supplied cord.
Jetbeam will be supplying us with the proper 12V AC adapters within the next two weeks. Once available, they will be shipped out to all customers that purchased the i4 at no additional cost. Jetbeam assures us that this will resolve any issues you are currently having with the i4 charger.
Once again, please do not use the AC cord that was provided with your i4 charger. A replacement will be mailed out to you ASAP."
Flavio from BugOutGearUSA posted this:
"Apparently Jetbeam tested the chargers prior to shipping and did not find any issues with them. Since they have received some emails from their dealers (including us) they have been going crazy trying to find out what is causing these problems.
According to Jetbeam the chargers worked and continue to work fine with the ones they have on hand. They believe the issue is related voltage as the US uses 120V and the chargers were tested at 220V, which is standard for their country. They have found a solution to the problem, but we just want to speak with them tonight before we decide how we are going to proceed. We sincerely appreciate your patience while we resolve this issue. We are suspending shipment of all i4 chargers until we are satisfied with the solution. Can anyone from outside the US post comments on whether they are having positive results with the new i4 charger? Also, has anyone tested them using the DC adapter?"
贴出翻译内容：
我刚刚收到这个：
“亲爱的客户，
如果你收到了这封邮件，你最近已经购买了思迈/捷特明i4电池充电器。
请阅读下面的关于你的充电器的重要信息。
我们要求你立刻停止使用你最近购买的思迈i4充电器。
请克制住使用i4充电器的需求直到合适的12V交流电转换器被提供给我们。它们在装船时被配备了错误的电源线，所以无法让充电器正常工作。如果使用此电源线那么充电器将无法正常运行并将无法给您的电池充电。如果使用此电源线，也将对充电器造成损害。
JETBEAM在下面两个星期内提供给我们合适的12V交流电转换器。一旦可以，它们将装船并送往所有购买i4充电器的顾客，不需要额外费用。JETBEAM对我们保证这样可以解决任何我们正在面对的i4充电器的问题。
再一次说明，请不要使用随你的i4充电器配备的电源线。替换的电源线将尽快寄给你。”
来自美国BugOutGear的Flavio贴出了这些：
“明显JETBEAM在装船之前检测了这个充电器，并没有发现它们有任何问题。但从他们收到一些来自经销商（包括我们）的邮件后他们便疯狂地试图寻找是什么在引起这些问题。
根据JETBEAM所说他们手上的充电器一直工作得很正常。他们相信那些问题是因为美国使用120V的电压但是充电器是在220V的中国标准电压下被检测的。他们已经发现了一个解决这个问题的方法，但我们只是想在我们决定怎么继续之前和他们谈谈。当我们解决这个问题的时候，我们真诚地感激你们的宽容。在我们对这些问题的解决感到满意之前，已经停止所有i4充电器的装船。请美国以外的i4用户能不能说明他们的新i4充电器是否正在出现异常？同时，有没有人使用直流适配器检测过它们？”
|
|
IP卡
狗仔卡
发表于 2011-10-18 22:43
置顶卡
喧嚣卡
变色卡
显身卡
楼主
